Nikon V3 User Manual download pdf (Page 251)

227

Storage

If the camera will not be used for an extended period, remove

the battery and store it in a cool, dry area with the terminal cover

in place. To prevent mold or mildew, store the camera in a dry,

well-ventilated area. Do not store your camera with naphtha or

camphor moth balls or in locations that:

• are poorly ventilated or subject to humidities of over 60%

• are next to equipment that produces strong electromagnetic

fields, such as televisions or radios

• are exposed to temperatures above +50 °C (122 °F) or below –10 °C

(14 °F)

Cleaning

Do not use alcohol, thinner, or other volatile chemicals.

Storage and Cleaning

Camera body

Use a blower to remove dust and lint, then wipe gently with

a soft, dry cloth. After using the camera at the beach or sea-

side, wipe off sand or salt with a cloth lightly dampened in

distilled water and dry thoroughly. Important: Dust or other

foreign matter inside the camera may cause damage not cov-

ered under warranty.

Lens,

viewfinder

These elements are easily damaged. Remove dust and lint

with a blower. If using an aerosol blower, keep the can verti-

cal to prevent the discharge of liquid. To remove finger-

prints and other stains, apply a small amount of lens cleaner

to a soft cloth and clean with care.

Monitor

Remove dust and lint with a blower. When removing finger-

prints and other stains, wipe the surface lightly with a soft

cloth or chamois leather. Do not apply pressure, as this

could result in damage or malfunction.

Dust shield

The dust shield is easily damaged. Remove dust and lint

with a blower.

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 295 296

No comments

Nikon V3 User Manual Page 251