Nikon Camcorder D2H User Manual download pdf (Page 128)

116

Taking Photographs—Flash Photography

Notes on Optional Speedlights

Refer to the Speedlight manual for detailed instructions. If the Speedlight supports

i-TTL or D-TTL ﬂ ash control, refer to the entry for digital SLR cameras in the table of

camera types.

If Auto FP High-Speed Sync is not used, the shutter will synchronize with an external

ﬂ ash at speeds of ½

50 s or slower.

If the ﬂ ash-ready indicator blinks for about three seconds after a photograph is taken

with i-TTL or D-TTL ﬂ ash control, the photograph may be underexposed.

The SB-28DX displays exposure in increments of

3 EV. If the camera is set to control

exposure in increments of ½ EV using Custom Setting b2, the SB-28DX exposure dis-

play will not show the correct ISO value. The actual exposure value is not affected.

i-TTL and D-TTL ﬂ ash con trol can be used to adjust ﬂ ash out put at sensitivity (ISO

equiv a len cy) set tings be tween 200 and 1600. At settings of HI-1 and HI-2, the desired

re sults may not be achieved at some ranges or aperture settings.

The AF-assist il lu mi na tor on SB-series 80DX, 28DX, 28, 27, 26, and 24 Speedlights will

only light if all of the fol low ing con di tions are met: focus mode is set to single-servo

auto, an AF-Nikkor lens is used, the subject is poorly lit, and the center focus area is

selected or dynamic-area AF is used in com bi na tion with clos est-subject priority.

In programmed auto, the maximum aperture (minimum f/-number) is lim it ed ac-

cord ing to sen si tiv i ty (ISO equivalency), as shown below:

For each one-step increase in sensitivity (e.g., from 200 to 400), aperture is stopped

down by half an f/-stop. If the maximum aperture of the lens is smaller than given

above, the maximum value for aperture will be the maximum aperture of the lens.

When an SC-series 17, 28, or 29 sync cable is used for off-camera ﬂ ash photography,

correct exposure may not be achieved in i-TTL or D-TTL mode. We recommend that

you choose spot metering to select standard i-TTL or D-TTL ﬂ ash control. Take a test

shot and view the results in the monitor.

In i-TTL or D-TTL mode, use the ﬂ ash panel provided with your Speedlight. Do not use

other panels such as diffusion panels, as this may produce incorrect exposure.

D-TTL ﬂ ash control can not be used for multi-ﬂ ash photography.

Maximum aperture at an ISO equivalent of:

250

4.2

320

4.5

400

4.8

500

640

5.3

800

5.6

1000

1250

6.3

1600

6.7

200

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 263 264

Comments to this Manuals

No comments

Nikon Camcorder D2H User Manual Page 128

Comments to this Manuals

Related products and manuals for Camera accessories Nikon Camcorder D2H