Nikon EH EL2 User Manual download pdf (Page 9)

Removing the Battery

The battery chamber's built-in ejector-type mechanism

makes for easier removal operation when removing/

replacing the battery. To remove the battery from the

camera, take off the lens and lock up the mirror as

mentioned previously. Then, while holding the camera

upside-down, release the battery chamber lid and push

it slightly toward the back of the mirror box until the

battery drops free of the chamber. After removing the

battery, install a fresh one as explained previously.

Checking the Battery

The EL2 is provided with a special circuit that enables

the photographer to check the battery power condition

without causing excessive battery drain which might

occur by having to turn the camera on. To check bat-

tery power, simply depress the power check button

and watch the power check lamp for indication of the

power level. If the check lamp glows, battery power is

sufficient. If the lamp fails to glow, battery positioning

should be checked;

then,

if the lamp still fails to glow,

replace the battery.

Note:

When checking battery power, hold the button depressed

only long enough for the check lamp to glow; prolonged de-

pressing only serves to drain battery power.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

No comments

Nikon EH EL2 User Manual Page 9