
187Technical Notes
Remote
controls/
wireless remote
controller/
remote cords
• Wireless Remote Control ML-L3: The ML-L3 uses a 3 V
CR2025 battery.
Pressing the battery-chamber latch to the right (q),
insert a fingernail into the gap and open the battery
chamber (w).
Ensure that the battery is inserted in the
correct orientation (r).
• Wireless Remote Controller WR-R10/WR-T10: When a WR-R10
wireless remote controller is attached, the camera can
be controlled wirelessly using a WR-T10 wireless
remote controller.
• Wireless Remote Controller WR-1: The WR-1 can function as
either a transmitter or a receiver and is used in
combination either with another WR-1 or a WR-R10 or
WR-T10 wireless remote controller. For example, a
WR-1 can be connected to the accessory terminal for
use as a receiver, allowing camera settings to be
changed or the shutter to be released remotely by
another WR-1 acting as a transmitter.
• Remote Cord MC-DC2: Attach this 1 m (3 ft 3 in.) cord to the
camera accessory terminal to release the shutter
remotely.
A Using the Accessory Terminal
Connect accessories as shown, with the H
mark on the connector aligned with the F
next to the accessory terminal.
To prevent
malfunction caused by foreign matter on the
terminal, close the camera connector cover
when the terminal is not in use.
Comments to this Manuals