Nikon WP-CP2 User Manual download pdf (Page 25)

Maintenance

Grease the O-ring

If the O-ring is not properly greased, it may crack

or peel, causing leaks. If the bottom of the O-ring

appears dry, place a drop of O-ring grease on your

index ﬁ nger and spread grease on the O-ring by

sliding it between your thumb and index ﬁ nger,

gently stretching the ring. Do not use cloth or

paper, as these may leave ﬁ bers on the O-ring.

Note that applying too much grease may cause

foreign matter to adhere more readily to the ring,

preventing the case from sealing properly.

Replace the O-ring

Making sure the O-ring and guide are free of

foreign objects, place the O-ring so that it runs

evenly at the same level all the way round the O-

ring guide, without undue stretching and without

protruding from the guide.

Cleaning

Do not use detergents or volatile chemicals such as alcohol or thinner when cleaning

the case. Failure to observe this precaution could result in damage to the case or O-

ring.

Check the seal

Close the case and check that the case is fully

sealed. If the O-ring does not form a perfect seal,

open the case and adjust the O-ring to prevent

leaks.

1 ... 24 25 26

No comments

Nikon WP-CP2 User Manual Page 25