Nikon SB-910 User Manual download pdf (Page 92)

E–10

Functions

Taking Close-up Photographs

Setting the built-in wide panel

Carefully pull the built-in

wide panel all the way out

and position it over the

ﬂ ash panel.

Slide the bounce card back

into place inside the ﬂ ash

head.

To replace the built-in wide panel, lift it up and slide it into the flash head as far •

as it will go.

Zoom head position indicator

When the built-in wide panel is attached, •

the zoom head position is automatically set

depending on the camera’s image area and

illumination pattern. The zoom head position

is set at 12 mm, 14 mm or 17 mm in FX

format, and 8 mm, 10 mm or 11 mm in DX

format. (0H-17)

The illumination pattern can be changed •

with function button 1. (0E-3)

In the event that the built-in wide panel breaks, the zoom head position can be •

set manually. This is done by selecting the “ ” icon in the custom settings

(0B-20) and choosing “ON.”

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 135 136

No comments

Nikon SB-910 User Manual Page 92