Nikon WT-4 User Manual download pdf (Page 67)

Copying Network Profiles to the Camera / Infrastructure Networks

Using the WT-4 with a Computer

9 Enter the following information and click [Next].

• Network name (SSID): Enter a network name or choose from a

list of existing networks. Do not change the name if it is

supplied automatically.

• Communication mode: Select [Infrastructure].

• Authentication: Choose the authentication used on the

network. In infrastructure mode, the camera supports WPA-

PSK, WPA2-PSK, open system, and shared key

authentication.

• Encryption: Choose the encryption used on the network. The

options available depend on the authentication used:

Open: None, 64- or 128-bit WEP Shared: 64- or 128-bit WEP

WPA-PSK: TKIP, AES WPA2-PSK: AES

• Encryption key: If the network uses encryption, enter the

network key. The number of characters required depends

on the type of key used:

• Key Index: If [WEP64] or [WEP128] is selected for [Encryption],

choose a key index (the default index is [1]). A key index is

not required when [None] is selected.

WEP (64-bit) WEP (128-bit) TKIP, AES

Number of characters (ASCII) 5138–63

Number of characters (hex) 10 26 64

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 198 199

No comments

Nikon WT-4 User Manual Page 67