Nikon StabilEyes 16x32 User Manual download pdf (Page 16)

How to Use and Focus

(1) Eyepiece

If you wear glasses or sunglasses when using

StabilEyes binoculars, turn the turn-slide-type eyecup

to its fully retracted position. For users with normal

eyesight, turn the eyecup to its fully extended

position.

(2) Adjusting the interpupillary distance

Grasp either eyepiece and rotate it towards or away

from the center of the binocular (the other eyepiece

will move equally in the opposite direction.)

Adjust the interpupillary distance to match the

distance between your eyes until you see just one

perfectly round image.

(3) Diopter adjustment

There are two steps to focusing: Close your right eye

and use only your left eye as you adjust the focus

control knob. When the image is sharp, close your left

eye and open your right eye. Twist the right eyepiece,

to focus for the right eye. Now open both eyes and the

binoculars should be perfectly focused. You can do

this with the StabliEyes turned on with stabilizing

activated or with the power off completely.

When you view a different subject, adjust the focus

control knob until you obtain a sharp image.

(4) Stabilization feature

When you press the Power button the first time, the

LED lights in orange, and the binoculars go to Standby

mode. Your StabilEyes binoculars go through an

internal system check and take about five seconds to

stabilize their performance.

Then, turn the stabilization lever to the ON position.

The LED turns green, indicating that the stabilization

feature is active.

As long as you keep the VR PAUSE button pressed,

stabilization is paused, so you can minimize image

instability while panning, switching among objects in

view, or viewing moving objects. Use this function to

search among objects using the binoculars.

Setting the stabilization lever back to the OFF position

turns the stabilization feature off, and the LED turns

orange again, indicating Standby mode.

Set the stabilization lever as you wish.

Stand by mode conserves battery power.

When finished, turn the stabilization lever to the OFF

position and press the Power button to turn off.

If you leave your StabilEyes binoculars in either

Standby or Stabilization mode for a few minutes

without using them, the stabilization lever will return

to the OFF position, and the binoculars will shut off

automatically.

Eyeglass wearer Non eyeglass wearer

Merge the two circular

viewfields into one.

Focus control knob

Diopter

adjustment ring

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Comments to this Manuals

No comments

Nikon StabilEyes 16x32 User Manual Page 16

Comments to this Manuals

Related products and manuals for Binoculars Nikon StabilEyes 16x32