19
Charging the Battery
First Steps
Turning On and Off the Camera
Press the power switch to turn on the camera.
The power-on lamp (green) lights, and then the
monitor is turned on (the power-on lamp turns off
when the monitor is turned on).
Press the power switch again to turn off the camera.
When the power is turned off, the power-on lamp
and monitor are also turned off.
• When the camera is off, holding down the c button turns on the camera in
playback mode (A30).
C Standby Mode (Auto Off)
If no operations are performed, the monitor is turned off automatically, the camera enters standby
mode and the power-on lamp blinks. The camera turns off when the standby mode continues for
about three minutes.
• When the power-on lamp blinks, turn on the monitor again with one of the following operations.
- Press the power switch, the shutter-release button, the c button or the b (e movie-record)
button.
- Rotate the mode dial.
• In shooting or playback mode, the camera will enter standby mode in about one minute (default
setting).
• The time that elapses before the camera enters standby mode can be changed from the Auto off
(A153) in the setup menu (A141).
Comments to this Manuals