Nikon D700 User Manual Page 177

  • Download
  • Add to my manuals
  • Print
  • Page
    / 472
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 176
151
r
3 Select direct measurement mode.
Release the WB button briefly and then
press the button until the L icon in
the control panel and viewfinder start
to flash.
A flashing D will also appear
in the control panel and viewfinder.
At
default settings, the displays will flash
for about six seconds.
4 Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press the shutter-release button all the way down.
The camera
will measure a value for white balance and store it in preset
d-0.
No photograph will be recorded; white balance can be
measured accurately even when the camera is not in focus.
5 Check the results.
If the camera was able to measure a
value for white balance, C will flash
in the control panel, while the
viewfinder will show a flashing a.
At
default settings, the displays will flash
for about six seconds.
Viewfinder
Control panel
Viewfinder
Control panel
Page view 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 471 472

Comments to this Manuals

No comments