Nikon Speedlight SB-600 User Manual download pdf (Page 29)

If the ready-light blinks after shooting, the light might be

insufficient for correct exposure.

When the flash has fired at its maximum output in the TTL auto flash mode and

underexposure possibly occurred, the ready-lights on the SB-600 and in the

camera’s viewfinder blink for approx. 3 seconds. Depending on the camera in

use, the ready-light on the SB-600 or in the camera’s viewfinder lights up.

To compensate, use a wider aperture after setting the camera’s exposure

mode to Aperture-Priority Auto (A) or Manual (M), or move closer to the subject

and reshoot.

Display of the amount of underexposure

The amount of underexposure (0 to –3.0 EV) appears for approx. 3 seconds on

the SB-600’s LCD panel when used with cameras compatible with CLS, digital

SLRs not compatible with CLS and cameras in Group I in the TTL auto flash

mode. The above ready-lights will also blink at the same time.

•Pressing the

and

buttons simultaneously recalls this display.

Basic operation

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

No comments

Nikon Speedlight SB-600 User Manual Page 29