Nikon Speedlight SB-600 User Manual download pdf (Page 74)

Set the camera’s exposure mode to Aperture-

Priority Auto (A) or Manual (M).

Set the camera’s metering system to Matrix

Metering

or Center-Weighted Metering

Set the SB-600’s flash mode to TTL auto flash.

Gently pull out the built-in wide-flash adapter and

position it over the flash head.

• The zoom-head position is automatically set at 14 mm

when using the built-in wide-flash adapter.

•To slide the wide-flash adapter back into place, lift

and push it into the flash head as far as it will go.

Confirm that the ready-light is on, then shoot.

• When the flash has fired at its maximum output and

underexposure may have occurred, the ready-light on

the SB-600 blinks for approx. 3 sec. To compensate,

use a wider aperture or move closer to the subject

and reshoot.

Close-up flash operation

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 91 92

No comments

Nikon Speedlight SB-600 User Manual Page 74