Nikon Autre-télécommande User Manual download pdf (Page 32)

Timed Photography (5/7)

Setting the Timer

To ensure correct operation, choose an interval at

least one second longer than the exposure time.

When using autofocus, set the delay to two sec-

onds or more and choose an interval at least two

seconds longer than the exposure time to ensure

that the camera has time to focus. When using

long exposure noise reduction (available with

some digital cameras), the interval should be at

least twice the exposure time.

Intervals of 00:00:00 will automatically be re-

set to 00:00:01 when the SET button () is pressed

to put settings into eﬀ ect.

To set the number of shots to

(unlimited),

select 1 and press the arrow button () down or

select 399 and press the arrow button up.

2.3 After adjusting all settings as desired, press

the SET button () to put the new settings

into eﬀ ect. A beep will sound (if the speak-

er is on) and the “SET” indicator will go out.

The new settings will remain in eﬀ ect until

changed or until the batteries are removed

or exhausted.

3. Start the Timer

Press the TIMER START/STOP button (). The

timer will start and “TIMER ACTIVE” () will ﬂ ash

in the control panel. Between shots, the con-

trol panel will show the time remaining until

the next photograph is taken. If the speaker is

on, a beep will sound three times at one-sec-

ond intervals before the shutter opens.

While the shutter is open, the control

panel will show the time remaining until the

shutter closes, and the release lamp and “RE

LEASE” indicator () will ﬂ ash at one-second

intervals. The number of shots remaining will

be updated each time a photograph is taken.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 235 236

No comments

Nikon Autre-télécommande User Manual Page 32