Nikon Nikon 1 V1 User Manual download pdf (Page 66)

54

n

Cleaning: When cleaning the camera

body, use a blower to gently remove

dust and lint, then wipe gently with a

soft, dry cloth. After using the camera

at the beach or seaside, wipe off any

sand or salt using a cloth lightly

dampened in pure water and then

dry the camera thoroughly.

The lens is easily damaged. Dust and

lint should be gently removed with a

blower. When using an aerosol

blower, keep the can vertical to pre-

vent discharge of liquid. To remove

fingerprints and other stains from the

lens, apply a small amount of lens

cleaner to a soft cloth and wipe the

lens carefully.

Storage

: To prevent mold or mildew,

store the camera in a dry, well-venti-

lated area. If you are using an AC

adapter, unplug the adapter to prevent

fire. If the product will not be used for

an extended period, remove the bat-

tery to prevent leakage and store the

camera in a plastic bag containing a

desiccant. Do not, however, store the

camera case in a plastic bag, as this

may cause the material to deteriorate.

Note that desiccant gradually loses its

capacity to absorb moisture and

should be replaced at regular intervals.

To prevent mold or mildew, take the

camera out of storage at least once a

month. Turn the camera on and

release the shutter a few times before

putting it away.

Store the battery in a cool, dry place.

Replace the terminal cover before

putting the battery away.

Notes on the monitor and viewfinder: These

displays are constructed with

extremely high precision; at least

99.99% of pixels are effective, with no

more than 0.01% being missing or

defective. Hence while these displays

may contain pixels that are always lit

(white, red, blue, or green) or always

off (black), this is not a malfunction

and has no effect on images recorded

with the device.

Images in the monitor may be diffi-

cult to see in a bright light.

Do not apply pressure to the displays,

as this could cause damage or mal-

function. Dust or lint on the displays

can be removed with a blower. Stains

can be removed by wiping lightly

with a soft cloth or chamois leather.

Should the monitor or viewfinder

break, care should be taken to avoid

injury from broken glass and to pre-

vent liquid crystal from the display

touching the skin or entering the

eyes and mouth.

Moiré: Moiré is an interference pattern

created by the interaction of an

image containing a regular, repeating

grid, such as the pattern of weave in

cloth or windows in a building, with

the camera image sensor grid. In

some cases, it may appear in the form

of lines. If you notice moiré in your

photographs, try changing the dis-

tance to the subject, zooming in and

out, or changing the angle between

the subject and the camera.

1 ... 65 66 67 ... 88

Comments to this Manuals

No comments