EnNetwork GuidePrinted in EuropeSB2A01(11)6MB14711-01No reproduction in any form of this manual, in whole or in part (except for brief quotation in cr
EnNetwork GuidePrinted in EuropeSB2A01(11)6MB14711-01No reproduction in any form of this manual, in whole or in part (except for brief quotation in cr
1IntroductionThank you for your purchase of a Nikon single-lens reflex (SLR) digital camera. This guide describes how to use the camera in (chiefly Et
2Network OptionsUse an Ethernet cable or an optional WT-5 or WT-4 wireless transmitter to connect the camera to computers or ftp servers via Ethernet
3A Ethernet ConnectionEthernet connections require no adjustments to wireless LAN settings.A FTP ServersServers can be configured using standard ftp s
4Installing SoftwareBefore connecting to a network, install the Wireless Transmitter Utility, available for free download from the Nikon website using
53 Start the installer.Click Next (Windows) or Continue (Mac OS) and follow the on-screen instructions.4 Exit the installer.Click OK (Windows) or Clos
6A Wireless Transmitter Utility System RequirementsWindowsCPU Intel Celeron, Pentium 4, or Core series, 1.6 GHz or betterOSPre-installed versions of W
7Transfer, Control, and HTTPFollow the steps below to connect to a computer in image transfer, camera control, and http server modes.Ethernet Connecti
8Step 1: Connecting an Ethernet Cable Step 1: Connecting an Ethernet CableAfter starting the computer and logging in, ready the camera and WT-5 as des
9Step 1: Connecting an Ethernet Cable3 Turn the camera on.Rotate the power switch to turn the camera on.A Connection StatusConnection status is shown
iiWhat Networks Can Do for YouThis manual describes how to connect to a network, access the camera remotely, and upload images to computers and ftp se
10Step 2: Enabling the Ethernet Step 2: Enabling the EthernetSelect the Ethernet as the network device used by the camera.1 Display the hardware list.
11Step 3: The Connection Wizard3 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard.4 Choose a connect
12Step 3: The Connection Wizard 6 Obtain or select an IP address.Highlight one of the following options and press 2.• Obtain automatically: Select thi
13Step 4: Pairing8 Exit the wizard.Highlight one of the following options and press J.• Connect and exit wizard: Save the new network profile and conn
14Step 4: Pairing 2 Start the Wireless Transmitter Utility.When prompted, start the copy of the Wireless Transmitter Utility installed on the computer
15Image TransferImage transfer is used to upload photographs and movies to the computer from a camera memory card. The explanation that follows assume
164 View pictures.Press the K button to view pictures. Display the first picture to be sent in single-image playback or highlight it in the thumbnail
17Interrupting Transmission/Removing Transfer MarkingTo cancel transmission of images marked with white or green transfer icons, select the images dur
18Transfer StatusDuring playback, the status of images selected for upload is shown as follows:a: “Send”Images that have been selected for upload are
19Camera ControlSelect this option to control the camera from a computer running Camera Control Pro 2 (available separately) and save photographs dire
iii3Control multiple cameras(requires optional WT-5)A TipSee page 7 for information on configuring the camera for connection to a host computer, page
203 Select Enable.Highlight Enable and press 2 to connect to the network and return to the network menu.The profile name will be displayed in green wh
21A Network StatusNetwork status can be viewed in the top level of the network menu.Signal strength: Wireless signal strength. Ethernet connections ar
22HTTP ServerSelect HTTP server to view the pictures on the camera memory card or take photographs from the web browser on a computer or iPhone (see p
233 Select Enable.Highlight Enable and press 2 to connect to the network and return to the network menu.The URL used for connection to the camera is
246 Log in.Enter your user name and password in the web browser login dialog (the user name and password are set using Network settings > Options &
257 Choose a language.Click Language and choose English, French, German, Japanese, or Spanish.8 Choose an operating mode.Choose Shooting/Viewer to tak
26A Network StatusNetwork status can be viewed in the top level of the network menu.Signal strength: Wireless signal strength. Ethernet connections ar
27A HTTP Server System RequirementsWindowsCPU Intel Celeron, Pentium 4, or Core series, 1.0 GHz or betterOSPre-installed versions of Windows 7 Home Ba
28Computer Web BrowsersThis section describes the http server displays for computer web browsers (dialogs are shown with all buttons displayed for exp
29Display panelContains the exposure indicator and shows the battery level and number of exposures remaining.Camera settingsShows shutter speed, apert
ivTrademark InformationMacintosh, Mac OS, and iPhone are trademarks of Apple Computer, Inc. Microsoft, Windows, and Windows Vista are registered trade
30❚❚ The Viewer WindowThe viewer window can be accessed by selecting Viewer on the server home page or clicking the view button in the shooting window
31Film-Strip ViewChoose the picture displayed from the thumbnails at the bottom of the window.Full-Frame ViewView pictures full frame.Current picture
32iPhone Web BrowsersThis section describes the http server displays for iPhone web browsers (dialogs are shown with all buttons displayed for explana
33❚❚ The Viewer WindowThe viewer window can be accessed by selecting Viewer on the server home page or tapping the view button in the shooting window.
34Full-Frame ViewView pictures full frame.Navigation controlsCurrent picture (tap to return to thumbnail view)Show next imageShow previousimageView mo
35FTPFollow the steps below to connect to an ftp server.Ethernet ConnectionsFTP serverStep 1: Connect an Ethernet cable (036)For information on using
36Step 1: Connecting an Ethernet Cable Step 1: Connecting an Ethernet CableAfter starting the ftp server, connect the camera as described below.1 Inse
37Step 2: Enabling the EthernetStep 2: Enabling the EthernetSelect the Ethernet as the network device used by the camera.1 Display the hardware list.I
38Step 3: The Connection Wizard 3 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard.4 Choose a connec
39Step 3: The Connection Wizard7 Choose the server type.Highlight FTP or SFTP (secure ftp) and press 2.8 Enter the IP address.Enter the server URL or
vNotices• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
40Step 3: The Connection Wizard 10Choose a destination folder.Highlight one of the following options and press J.• Home folder: Select this option to
41FTP UploadPhotos and movies can be uploaded from camera memory cards to an ftp server as described below, or photos can be uploaded as they are take
424 View pictures.Press the K button to view pictures. Display the first picture to be sent full frame or highlight it in the thumbnail list.5 Upload
43Uploading New Photographs as They Are TakenTo upload new photographs as they are taken, select On for Network > Options > Auto send in the set
44Transfer StatusDuring playback, the status of images selected for upload is shown as follows:a: “Send”Images that have been selected for upload are
45Synchronized ReleaseSynchronized release groups one master D4 camera with up to ten remote cameras and synchronizes the shutters on the remote D4 c
46Synchronized Release OptionsThe following options are available for synchronized release: Group name, Master/remote, Remote camera check, and Number
47Remote Camera CheckSelect On to check whether the remote cameras are ready. The LED on the WT-5 will flash to warn if the number of cameras returnin
48Taking Pictures1 Display network settings.In the setup menu, select Network > Network settings.2 Select Synchronized Release.Highlight Synchroniz
495 Take pictures.Pressing the shutter-release button on the master camera releases the shutters on the remote cameras.A Remote Camera CheckIf remote
vi• Cautions on certain copies and reproductionsThe government has issued cautions on copies or reproductions of securities issued by private companie
51Menu GuideThis section describes the items in the Network menu.Choose the hardware used to connect to the network: Ethernet, WT-5, or WT-4 (02).Choo
52Highlight Network settings and press 2 to display the network profiles list, where you can create new profiles or select an existing profile.❚❚ The
53❚❚ Create ProfileChoose Connection wizard to create network profiles with the help of a wizard (0 10, 37), Configure manually to enter ftp and http
54❚❚ Editing Network ProfilesTo edit the profile currently highlighted in the profile list, press W and choose from the following options:GeneralChoos
55WirelessEdit the following wireless settings:• SSID: Enter the name (SSID) of the network on which the host computer or ftp server is located.• Comm
56TCP/IPIf the network is configured to supply IP addresses automatically, select Enable for Obtain automatically. Otherwise remove the check from thi
57Edit the following settings.❚❚ Auto SendIf On is selected for image transfer or ftp server connections, photos will automatically be uploaded to the
58❚❚ Protect If Marked for UploadSelect Ye s to automatically protect files marked for upload to an ftp server. Protection is removed as the files ar
59AppendicesThe Wireless Transmitter Utility (04) can be used to create network profiles. 1 Connect the camera.Start the computer and connect the came
viiIllustrationsSave where otherwise noted, all software and operating system dialogs, messages, and displays are taken from Windows 7 or Mac OS X. Th
603 Start the Wireless Transmitter Utility.Double-click the Wireless Transmitter Utility icon on the desktop (Windows) or click the Wireless Transmitt
61Creating an FTP ServerImages can be uploaded to ftp servers created using the standard ftp services included with Windows 7 (Ultimate/Business/Enter
62Windows 71 Go to Network and Sharing Center.Click Start > Control Panel > Network and Internet > Network and Sharing Center.2 Display the n
634 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.5 Enter an IP address and subnet mask.Enter an IP addre
646 Close the network properties dialog.Click Close.7 Open Administrative Tools.Click Start > Control Panel > System and Security > Administr
658 Open the IIS manager.Double-click Internet Information Services (IIS) Manager.9 Select Add FTP Site….Right-click the computer user name and select
6610Enter site information.Name the site and choose the path to the folder that will be used for ftp upload. Click Next to proceed.A Anonymous LoginTo
6711Choose binding and SSL options.Select the IP address entered in Step 5, note the port number, select Start FTP site automatically, and check No SS
6812Choose authentication options.Adjust settings as described below and click Finish.• Authentication: Basic• Allow access to: All users• Permissions
69Windows Vista1 Display network connections.Click Start > Control Panel > Network and Internet Settings > Network Connections > Manage Ne
viiiWhat Networks Can Do for You...iiNotices...
704 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
715 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.6 Open Administrative Tools.Click Start &g
727 Open the IIS manager.Double-click IIS 6.0 Manager.8 Click Allow.A “User Account Control” dialog will be displayed; click Allow.
739 Display ftp site properties.Right-click Default FTP Site and select Properties.
7410Select the address and port number.Select the IP address entered in Step 5 and enter a TCP port number.
7511Choose a home directory.Open the Home Directory tab and select A directory located on this computer. The root directory for images uploaded to the
76Windows XP1 Display network connections.Click Start > Control Panel > Network and Internet Settings > Network Connections.2 Open the networ
774 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.5 Open Internet Information Services.Click
786 Display ftp site properties.Right-click Default FTP Site and select Properties.7 Select the address and port number.Select the IP address entered
798 Choose a home directory.Open the Home Directory tab and select a directory located on this computer. The root directory for images uploaded to the
ixFTP 35Ethernet Connections... 35Step 1: Connecting an Ethernet Cable ...
80Mac OS X 10.61 Display network settings.Open System Preferences and click Network.2 Adjust network settings.Click the type of network you will use t
814 Display file sharing options.Select File Sharing and click Options.5 Turn ftp file sharing on.Select Share files and folders using ftp.This comple
82Manual Profile CreationFollow the steps below to manually configure the camera for connection to ftp and http servers. Note that changes to the curr
834 Select a connection type.Highlight FTP upload or HTTP server and press 2.5 Adjust settings.Adjust settings as described in “Editing Network Profil
84TroubleshootingProblem Solution PageThe camera displays a TCP/IP or ftp error.Check settings for the host and/or wireless LAN adapter and adjust cam
85IndexSymbolsa: “Send” ...18, 44b: “Sending”...18, 44c: “Sent” ...
86PPairing ...13Password protection ...54PASV mode ...
87
88
Comments to this Manuals