Nikon D3 User Manual Page 207

  • Download
  • Add to my manuals
  • Print
  • Page
    / 480
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 206
195
The following flash units can be used in non-TTL auto and manual
modes. If they are set to TTL, the camera shutter-release button
will lock and no photographs can be taken.
Refer to the Speedlight manual for detailed instructions. If the Speedlight
supports the Nikon Creative Lighting System, refer to the section on CLS-
compatible digital SLR cameras. The D3 is not included in the “digital SLR”
category in the SB-80DX, SB-28DX, and SB-50DX manuals.
i-TTL flash control can be used at ISO sensitivities between 200 and 6400.
At values over 6400, the desired results may not be achieved at some
ranges or aperture settings. If the flash-ready indicator blinks for about
three seconds after a photograph is taken, the flash has fired at full power
and the photograph may be underexposed.
Non-TTL auto
Manual ✔✔✔✔
Repeating flash ———
Rear-curtain sync ✔✔✔✔
1 Flash mode is automatically set to TTL and shutter-release is disabled. Set flash
unit to (non-TTL auto flash).
2 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, or 200 mm).
Page view 206
1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 479 480

Comments to this Manuals

No comments