147
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera and Printer
1
Turn off the camera.
2
Turn on the printer.
• Check printer settings.
3
Connect the camera to the printer using the supplied USB cable.
4
The camera turns on automatically.
• When connected correctly, the PictBridge startup
screen (1) will be displayed in the camera monitor.
Then the Print selection screen (2) will be displayed.
B Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when
connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.
B If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (A168) in the camera’s
setup menu to Off, then connect the camera again.
32
32
NO.
Print selection
15/05
2010
12
Comments to this Manuals