Nikon COOLPIX-P100 User Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 216
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
21
Charging the Battery
First Steps
Turning On and Off the Camera
Remove the lens cap before turning on the camera. Press
the power switch to turn on the camera. The power-on
lamp (green) will light for a moment and the monitor will
turn on.
Press the power switch again to turn off the camera.
When the power is turned off, both the power-on lamp
and monitor turn off.
When the camera is off, holding down the c button will turn the camera on in
playback mode (A32).
C Lens Error
If Lens error. (If the lens cap is attached, turn the camera off, remove the lens cap, and turn
the camera on.) is displayed, check that the lens cap has been removed and turn the camera on
again.
C Standby Mode (Auto Power Off)
If no operations are performed, the monitor turns off automatically, the camera enters standby mode
and the power-on lamp blinks. If no operations are performed for another three minutes, the camera
will turn off automatically.
During shooting or playback, if no operations are performed for about a minute (default setting),
the camera enters standby mode.
If the monitor is off in standby mode (when the power-on lamp blinks), perform the following
operations to turn on the monitor.
- Press the power switch, the shutter-release button or the c button.
- Rotate the mode dial.
The time that elapses before the camera enters standby mode can be changed from the Auto off
(A165) in the setup menu (A152).
Page view 32
1 ... 32 33 34 ... 216

Comments to this Manuals

No comments